R5 3600 RTX 2060 6gb 16gb RAM Sata Crucial 500gb SSD how well can i run this game with this specs, it says i need Super model of my card with 8gb, i at least want Textures High and other Low/Medium settings (shadows can stay low) Am just wondering what FPS would i be getting?
From what I've tested so far View distance - vegetation only effects how far it is until ground vegetation is loaded (not trees / bushes etc). doesn't offer any 'unfair advantage' although it does make the ground at a distance appear more of a blank slate, which would make hunters easier to see up against it
@@RenTGen666 It's the least demanding setting for game next to anisotropic filtering. Only an issue if you run out of VRAM which causes the game to load assets to disk drive, which you don't want. Basically use as much as your VRAM will allow.
If you're not using geforce experience or another program to "optimize" then it absolutely does impac your games. just make sure you have the permissions set correctly so NVIDIA control panel is prioritized over the in-game settings. Unless someone can correct me here? I don't work in industry anymore...
There should be a balance of quality and fps. Setting everything to low is ridiculous on anything but a geriatric card. Visibility is for people who want to get an advantage at the cost of the experience of the game.
@@RoxiieReadsLore No but I tested all the settings myself. Just turn down both shadow settings first. I like medium Then maybe the range settings if you have cpu issues. What gpu do you have?
What do you all use for sharpness in the hunt settings now that it is available? I’ve never thought to use sharpness so I’m very interested. What exactly will increasing sharpness in hunt showdown graphics settings DLSS do? I have DLSS quality., running 4k 117 fps (capped in nvidia control panel) on an lgc2 42 inch tv. 3090 card, 14900k, 64 GB memory. Thanks
In the old engine version if you had post processing set to low it caused less visibility in beetle view (looked more black). Not sure if that is the case still.
He's using a 240hz monitor @ 1440p so I'm guessing he wants the frames since he can actually benefit from it. Also less distractions and more visibility.
@@C_Becker some of us don't have great internet offerings so we try to reduce the delay via input lag as much as possible to equal things out a wee bit. ping abusing aint as big a deal anymore as well.
I feel like I'm being CPU bottlenecked pretty hard but honestly not sure. I'm using a 300hz 2560x1440p monitor. The following are my PC specs: GPU: RTX 4080 Super CPU: Ryzen 9 5900x RAM: 64gb 3600mhz The games on a pretty fresh 2tb m.2 pcie4 SSD (with like 1.5tb unused storage). I am playing at pretty much low on everything but my frames hover around 100~120 inside compounds and running around randomly throughout the map I can expect up to 180fps. I'm not sure if this is normal but I remember seeing hunt hitting way higher frames (in the past with better CPU and weaker GPU). What do you think? If you do think it's a CPU bottleneck would you recommend me purchasing the 7900 series (so new MB, Ram and CPU), just get a x3d in 5000 series, or wait for a new ryzen chip?
For comparison I have a 4070 and a 5800x: DLSS Quality (it’s blurry but it saves me like 40 damn FPS) I have textures and object quality on ultra, filtering 16x, view distance & light distance on ultra, everything else to the lowest sliders. My high and low are 95-150 FPS.
Thanks dude! i had massive issues even tho i have quite the good pc... there are still some specific areas on the new map that drop my FPS from 120 down to 23.... its really wild
the fps drops are usually at near around outside the cave, from what i found. my game usually never drops to 60fps but when i look at the mountain where the caves are the fps drops to 10fps lol.
mine are the worst when im up high looking down on a compound or on a roof looking at the horizon. the new map has so much more to render than the previous ones
i think i found a possible solution. not sure if it works for anyone. go to the games directory and delete the folder named "user". it will revert all your ingame settings to default but u can change it back to ur liking. the massive fps drop is gone for me.
I have a question about what you said about uncaping your fps makes less Input latency. Do think it would be better to do that and have an Inconsistent frame rate or in my case would it be better to cap my FPS at 144 so I don't have an inconsistent frame rate?
Anyone saw FPS drops in certain areas? I played 2 matches today one was without any issue but the second game i had pretty bad FPS drops and couldnt fix it at all....
Devs took their life to make the best looking game possible, thank you to change it into a 2014 game 🤣. HDR is just beautiful, you can play a bit with contrast to see better the players.
Anyone else getting some weird screen flickering? Like black flashes randomly (in the top half of the screen for me) Only game that does this and now on the new engine :/
My FPS is about 100 to 120. than sometimes when I load in the game i get only 55 to 60 FPS. than after I did all the setting changes here it is 110 to 120 FPS consistently for awhile than it drop to 50 to 60 FPS again. than IF i restart my computer or restart the game 1 to 6 times I will get back my fps of 110 to 120. I am not sure if the game isn't registering with my NVDA RTX 2060 or what. anyone has the same issue?
Try setting VRAM target to 80% and don't change any graphics settings while in the match. Also make sure you've got the latest drivers. All those steps eliminated most of the FPS drops for me, even with DLSS turned off.
@jimj3700 @jimj3700 the vram thing doesn't work i change it to 80% and 70% it still doesn't work. However it is just for hunt showdown. Not sure if it is the computer not properly processing or prioritizing this particular app. But others are not having this problem so that is not exactly the issue as well.
Sigh... wanting to play the game more but when I'm in game if I just stand and look straight things look nice and crisp, running around 140fps 180hz monitor.. The moment I turn my mouse it makes like "tearing happen" makes the game unplayable at any level really. polling rate of mouse set to 1000 I have g-sync on idk what to do ;/
Hi, I have 4070 super, ryzen 7 7700, and I'm getting 70-75 fps on 1080p native with everything ultra, I tried lowering some settings, but only shadow quality did some difference. I have the latest drivers. I really don't know whats happening, benchmarks on youtube show a lot more fps. This is the first time I had a problem like that with any game on this pc.
4070 super and 7 5800 owner is here. 85-165 fps in 2k, dlss doesn't make sense. Even if VGA is not 100% loaded fps may drop anyway also makes this game too blurry without sharpness. AS is 1tx, 2tx makes game too blurry and 1x is too crispy. Textures on high everything else on low. Your CPU is higher gen than mine and vga equal and dramatic fps difference, they messed this up really hard
@@bull_chip I thought that it would be some dumb setting that messed with my system, but no. Nothing I found would be responsible for such a disparity between the supposed fps I should have had, and what I have now. Edit: I found it. Ultra shadow quality, and ultra fog tank fps hard compared to very high, to anyone, who has these problems like me, be careful with those. But still, in the benchmarks they had it on max and it was okay, so go figure.
See if lowering the VRAM target to 80% helps. Also don't change any graphics settings while in the match. It seems to degrade the performance. Hopefully they will patch it.
@@nayemrocks if he still plays some new gen games like this version of hunt with 1030 no wonder he cant get any good performance lol no guide can fix that
@@Kephren More recent games on his PC run butter smooth except this game, including various open world titles that are supposed to be more graphically demanding then a first person shooter set in a already loaded map Crytek just bad at optimizing their games and also you should not be making a video for lowspec people when you yourself use a 4090 you stinky dingus
@@davisterisboss3387 i did all that. i watched the guide. all stuff i basicly knew. i jusst had to drop it from 2k to 1080p. i have an older gpu, gtx1070
@@kingkracker1998 Bro, the 1070 cant run it that well now, specially in 2k anymore and most games dont run well beyond 1080p with that card, even tho it got 8gb witch helps a bit...but in raw power not anymore, on steam page it says RTX 2060 Super 8GB, tho a regular 6GB one would do the job just not beyond high and 1080p since that card rated to be stronger than 1070 ti despite the 2gb VRM diff. If anything set everything to low/Medium so ur FPS at least dosent get tanked to much, and also 1070 is not strong enough anymore for 2k with new games since 2020, in a sense 1080p is it's limit as if it a 6gb card now :/
Yup. Not only I disabled it, but also enabled sharpness filter in the Nvidia control panel since Hunt's graphics after the update seem a bit blurry for me in general.
@@jimj3700hunt now has a sharpness setting with DLSS . Do you use that now? I don’t know what to set my sharpness to. Playing at 4k, 120 (capped at 117fps), 3090
"Catch me live on Twitch! Join the kephrentv community for exciting streams and guaranteed fun! Click here: www.twitch.tv/kephrentv"
R5 3600
RTX 2060 6gb
16gb RAM
Sata Crucial 500gb SSD
how well can i run this game with this specs, it says i need Super model of my card with 8gb, i at least want Textures High and other Low/Medium settings (shadows can stay low)
Am just wondering what FPS would i be getting?
btw, what about fov?
You were quick with this one
From what I've tested so far View distance - vegetation only effects how far it is until ground vegetation is loaded (not trees / bushes etc). doesn't offer any 'unfair advantage' although it does make the ground at a distance appear more of a blank slate, which would make hunters easier to see up against it
Thanks man, I was running the game below 60 fps at times. Now I'm trucking above 130fps
He just puts the lowest setting available but textures XD
He has a 4090 too this is just bad haha
Why textures? isnt it like most demanding setting :D ?
@@RenTGen666 if you have enough vram it doesn't impact performance too much
@@RenTGen666 It's the least demanding setting for game next to anisotropic filtering. Only an issue if you run out of VRAM which causes the game to load assets to disk drive, which you don't want. Basically use as much as your VRAM will allow.
@@Gekka115 who doesn’t have a 4090 ? If you’re not serious about gaming just say so.
For anyone that wants the quick version, everything on low but textures. If you have an rtx card use dlss if you want to, same for amd with fsr.
It makes my game look super blurry :(
Same here like wtf.....@@K0MMEST
Same here. Any work around the settings.? @@K0MMEST
@@K0MMEST depends on your dlss settings
@@hilburnlayton DLSS on quality and it's pretty blurry still.
I hope everyone knows at this point that the nvidia controll panel does absolutely nothing in this day & age
Have not heard that, although I don’t modify it
yeah, nvidia controll panel did smth 15 years ago
i only use it for sharpness
I dont know ur exact point, but i think i disagree, i have had so much joy from the DSR setting, in literaly all games.
If you're not using geforce experience or another program to "optimize" then it absolutely does impac your games. just make sure you have the permissions set correctly so NVIDIA control panel is prioritized over the in-game settings.
Unless someone can correct me here? I don't work in industry anymore...
You can tell that you've put some thought into it, I've adopted it straight away.
Good tips, thanx. My game runs now around 100 FPS, which is nice improvement
Glad I could help
this doubled my fps from 85 to 165, tysm :D
Oh my gosh !! thanks for how fast that was dude !!!!!!
There should be a balance of quality and fps. Setting everything to low is ridiculous on anything but a geriatric card. Visibility is for people who want to get an advantage at the cost of the experience of the game.
yea i dont want to play this game at potato settings, looking for a nice balance. did you find another guide by chance that offered that balance?
@@RoxiieReadsLore No but I tested all the settings myself. Just turn down both shadow settings first. I like medium Then maybe the range settings if you have cpu issues. What gpu do you have?
@@guywithalltheanswers6942 3070, trying to hit consistent 60 fps while still looking okay and also have good visibility against players lol
The only vid made with clear evidence for fps and visibility 🎉
Question, on the nvidia dlss isnt better the option on performance mode before quality mode?
Merci beaucoup pour cette superbe vidéo! (french not my first language)
What do you all use for sharpness in the hunt settings now that it is available? I’ve never thought to use sharpness so I’m very interested. What exactly will increasing sharpness in hunt showdown graphics settings DLSS do? I have DLSS quality., running 4k 117 fps (capped in nvidia control panel) on an lgc2 42 inch tv. 3090 card, 14900k, 64 GB memory. Thanks
Can someone write the before and after fps values?
In the old engine version if you had post processing set to low it caused less visibility in beetle view (looked more black). Not sure if that is the case still.
Good point
if you use beetles just quit it already
A 4090 and low settings? Why?
He's using a 240hz monitor @ 1440p so I'm guessing he wants the frames since he can actually benefit from it. Also less distractions and more visibility.
@@HerZeL3iDza What do you do with 240 Hz? Absolute nonsense.
240hz monitor + lowest input lag.
@@C_Becker some of us don't have great internet offerings so we try to reduce the delay via input lag as much as possible to equal things out a wee bit. ping abusing aint as big a deal anymore as well.
@@nickvanrijn9304 What?
merci bud !
I feel like I'm being CPU bottlenecked pretty hard but honestly not sure. I'm using a 300hz 2560x1440p monitor. The following are my PC specs:
GPU: RTX 4080 Super
CPU: Ryzen 9 5900x
RAM: 64gb 3600mhz
The games on a pretty fresh 2tb m.2 pcie4 SSD (with like 1.5tb unused storage).
I am playing at pretty much low on everything but my frames hover around 100~120 inside compounds and running around randomly throughout the map I can expect up to 180fps. I'm not sure if this is normal but I remember seeing hunt hitting way higher frames (in the past with better CPU and weaker GPU). What do you think? If you do think it's a CPU bottleneck would you recommend me purchasing the 7900 series (so new MB, Ram and CPU), just get a x3d in 5000 series, or wait for a new ryzen chip?
You can check for cpu and gpu usage with many tools if you want to check
For comparison I have a 4070 and a 5800x:
DLSS Quality (it’s blurry but it saves me like 40 damn FPS)
I have textures and object quality on ultra, filtering 16x, view distance & light distance on ultra, everything else to the lowest sliders. My high and low are 95-150 FPS.
"I have the same specs as you, bro, and I got similar problems with bottleneck. This game is not well optimized specially with this new event.
Thanks dude! i had massive issues even tho i have quite the good pc... there are still some specific areas on the new map that drop my FPS from 120 down to 23.... its really wild
the fps drops are usually at near around outside the cave, from what i found. my game usually never drops to 60fps but when i look at the mountain where the caves are the fps drops to 10fps lol.
this is the problem Ive been having its unplayable
mine are the worst when im up high looking down on a compound or on a roof looking at the horizon. the new map has so much more to render than the previous ones
i think i found a possible solution. not sure if it works for anyone. go to the games directory and delete the folder named "user". it will revert all your ingame settings to default but u can change it back to ur liking. the massive fps drop is gone for me.
@@adondonadon that seems to have helped it for me as well.
I have a question about what you said about uncaping your fps makes less Input latency. Do think it would be better to do that and have an Inconsistent frame rate or in my case would it be better to cap my FPS at 144 so I don't have an inconsistent frame rate?
No, if you are getting too much drop, lock your fps.
@@Kephren Ok thank you.
Anyone saw FPS drops in certain areas? I played 2 matches today one was without any issue but the second game i had pretty bad FPS drops and couldnt fix it at all....
The Grizzly Lodge and one of the mines (forgot the name, it's the one with high ceiling) have perfomance issues.
@@jimj3700 yea thanks for your comment i had my issues in that mine area:)
I don't know if you fixed it yet. A friend of mine has regular fps drops with DLSS turned on
@@Arternis the last games i played i had no more issues
thx man
Do you recommend using dlss even when on 1920x1080?
Is that a "Masters of the Air" Wallpaper?
sure looks like it
Yes sir !
what do you use to record if no shadowplay or windows thingy?
Devs took their life to make the best looking game possible, thank you to change it into a 2014 game 🤣. HDR is just beautiful, you can play a bit with contrast to see better the players.
Resizable game bar dans le bios on ou of ?
Anyone else getting some weird screen flickering? Like black flashes randomly (in the top half of the screen for me) Only game that does this and now on the new engine :/
What is your gpu ?
My FPS is about 100 to 120. than sometimes when I load in the game i get only 55 to 60 FPS. than after I did all the setting changes here it is 110 to 120 FPS consistently for awhile than it drop to 50 to 60 FPS again. than IF i restart my computer or restart the game 1 to 6 times I will get back my fps of 110 to 120. I am not sure if the game isn't registering with my NVDA RTX 2060 or what. anyone has the same issue?
Try setting VRAM target to 80% and don't change any graphics settings while in the match.
Also make sure you've got the latest drivers. All those steps eliminated most of the FPS drops for me, even with DLSS turned off.
@jimj3700 @jimj3700 the vram thing doesn't work i change it to 80% and 70% it still doesn't work. However it is just for hunt showdown. Not sure if it is the computer not properly processing or prioritizing this particular app. But others are not having this problem so that is not exactly the issue as well.
bruh you are freaking god
Sigh... wanting to play the game more but when I'm in game if I just stand and look straight things look nice and crisp, running around 140fps 180hz monitor.. The moment I turn my mouse it makes like "tearing happen" makes the game unplayable at any level really.
polling rate of mouse set to 1000
I have g-sync on
idk what to do ;/
My game is suuuuper dark, its like the parts with the shadows are cut out, any ideas how to fix this?
Try raising gamma and turning down shadows in game?
Many players said that they have problems with black shadows. I think it's an issue on the crytek side
I'm guessing you have a AMD gpu? if so you can thank AMD for lack of driver support.
I've heard a lot of complain about this. I didn't see it on my 4090 and 2070. It's maybe a Radeon issue ?
@@Kephren apparently it’s only with amd, especially older ones like my rx580. I believe it’s a issue with the drivers
At the beginning, what is with the Ryzen 7 7800X3D?
hdr on or off?
you did not understand what g-sync is and that it even lowers latency.
Latency will be lower if you unlock your fps va gsync.
@@Kephren no.
they added the sharpness filter
Yes I will remake a guide.
@@Kephrenyea wondering what you recommend for sharpness 😊 thanks for guide!
I guess I won't find art direction tips here.
Ryzen 3 2200g amd rx580...
😢
Hi, I have 4070 super, ryzen 7 7700, and I'm getting 70-75 fps on 1080p native with everything ultra, I tried lowering some settings, but only shadow quality did some difference. I have the latest drivers. I really don't know whats happening, benchmarks on youtube show a lot more fps. This is the first time I had a problem like that with any game on this pc.
4070 super and 7 5800 owner is here.
85-165 fps in 2k, dlss doesn't make sense. Even if VGA is not 100% loaded fps may drop anyway also makes this game too blurry without sharpness. AS is 1tx, 2tx makes game too blurry and 1x is too crispy. Textures on high everything else on low.
Your CPU is higher gen than mine and vga equal and dramatic fps difference, they messed this up really hard
@@bull_chip I thought that it would be some dumb setting that messed with my system, but no. Nothing I found would be responsible for such a disparity between the supposed fps I should have had, and what I have now.
Edit: I found it. Ultra shadow quality, and ultra fog tank fps hard compared to very high, to anyone, who has these problems like me, be careful with those. But still, in the benchmarks they had it on max and it was okay, so go figure.
See if lowering the VRAM target to 80% helps. Also don't change any graphics settings while in the match. It seems to degrade the performance. Hopefully they will patch it.
fkin add in description that the video is only for win 11
My shadows are so dark like wtf
Do you use windows 10 or 11?
that task bar is 11
Windows 11
i guess if you want your game to look cheeks follow this guide. its basically just set everything to low
Goddamn dude, go straight to the point, you kept going back and forward, you need a script next time.
Ryzen 5 4600g, RX6600 8gb, 16gb 3200ghz, B550M aorus elite, PFC 650w 80plus white power supply, and i get 80 to 120 fps in 1920x1080 😢
much obligated. have +40 fps with rtx3060
my friend from poland sends hate
your video did not help!! he cant run it on his graphics card 1030
@@nayemrocks if he still plays some new gen games like this version of hunt with 1030 no wonder he cant get any good performance lol no guide can fix that
1030, please go play solitaire.
@@Kephren More recent games on his PC run butter smooth except this game, including various open world titles that are supposed to be more graphically demanding then a first person shooter set in a already loaded map
Crytek just bad at optimizing their games and also you should not be making a video for lowspec people when you yourself use a 4090 you stinky dingus
I FIRST TURNED ON THE NEWW UPDATE AND MY FPS WENT FROM 100 TO 40, and the game looked ugly as fuck. i just knew they was going to fuck this game up
Dlss and fsr make the game really blurry, same with motion blur and post processing. Turn it all off then follow this guide
Helps if you adjust image sharpening.
@@davisterisboss3387 i did all that. i watched the guide. all stuff i basicly knew. i jusst had to drop it from 2k to 1080p. i have an older gpu, gtx1070
@@kade6427 huge difference, thank you
@@kingkracker1998 Bro, the 1070 cant run it that well now, specially in 2k anymore and most games dont run well beyond 1080p with that card, even tho it got 8gb witch helps a bit...but in raw power not anymore, on steam page it says RTX 2060 Super 8GB, tho a regular 6GB one would do the job just not beyond high and 1080p since that card rated to be stronger than 1070 ti despite the 2gb VRM diff.
If anything set everything to low/Medium so ur FPS at least dosent get tanked to much, and also 1070 is not strong enough anymore for 2k with new games since 2020, in a sense 1080p is it's limit as if it a 6gb card now :/
Actual trash settings, don't copy that sht.
Super Resolution may boost your FPS, but makes everything blury.
Yeah, dlss makes this game look super blurry even on quality....
Yup. Not only I disabled it, but also enabled sharpness filter in the Nvidia control panel since Hunt's graphics after the update seem a bit blurry for me in general.
@@jimj3700hunt now has a sharpness setting with DLSS . Do you use that now? I don’t know what to set my sharpness to. Playing at 4k, 120 (capped at 117fps), 3090